Procurement Documents

CMMC Compliance Checklist (Free, Excel)

A free CMMC compliance checklist for defense contractors: every Level 1 and Level 2 requirement, with status, evidence, owner and POA&M fields, and an SPRS score that updates as you go.

4 sheets Microsoft Excel Updated November 15, 2026
Download Template
CMMC Compliance Checklist (Free, Excel) preview
CMMC Compliance Checklist (Free, Excel)

Preview an example

See an example before you download. The Excel file has every sheet listed below, ready to fill in, with instructions on its Read me sheet.

What's inside

The sections in the document, in order.

  1. How to use the CMMC checklist
  2. How the SPRS score works
  3. Level 1 vs Level 2 at a glance
  4. Frequently asked questions
  5. Related templates

This free CMMC compliance checklist puts every CMMC Level 1 and Level 2 requirement in one Excel workbook. Level 1 is the 15 basic safeguarding requirements in FAR 52.204-21, which match 17 NIST requirements. Level 2 is all 110 security requirements in NIST SP 800-171 Rev. 2, quoted word for word. For each requirement you record a status, the evidence, an owner and, where the rules allow one, a POA&M entry, and the SPRS score is calculated as you go.


The point values come from the CMMC scoring methodology in 32 CFR 170.24: 5, 3 or 1 points off a maximum of 110 for each requirement not met. They're the same values the DoD's NIST SP 800-171 assessment methodology uses for SPRS scores under DFARS 252.204-7019 and 252.204-7020. The checklist is for contractors and subcontractors that handle Federal Contract Information (FCI) or Controlled Unclassified Information (CUI), including IT and security firms that find DoD work on RFPhub's list of open federal IT and cybersecurity RFPs.


The checklist helps you prepare, but it isn't an assessment. Only an authorized assessor's result, or your own self-assessment and affirmation where the rule allows one, counts toward a CMMC status, and the score that counts is the one entered in SPRS.


What's inside this checklist


  • A Level 1 sheet with the 15 FAR 52.204-21 requirements, their CMMC IDs (AC.L1-b.1.i to SI.L1-b.1.xv) and the NIST SP 800-171 requirements each one maps to
  • A Level 2 sheet with all 110 NIST SP 800-171 Rev. 2 requirements in their 14 families, each with its CMMC ID, its point value and a flag on the 17 that also make up Level 1
  • Status, evidence and owner columns on every row, with status set to met, not met or not applicable, the three findings the CMMC rule uses
  • POA&M columns for the fix and target date, plus a note on whether each requirement can go on a CMMC POA&M at all under 32 CFR 170.21
  • A running SPRS score: 110 when everything is met, with each requirement's points taken off when it isn't, and the partial-credit options for multifactor authentication and FIPS-validated encryption
  • A check of whether your open items could qualify for a conditional Level 2 status: a score of at least 88 of 110, with only POA&M-eligible requirements still open

Use the score calculator on this page, or download the Excel checklist for evidence, owners and POA&M dates.

CMMC Level 2 score calculator

Mark each NIST SP 800-171 requirement as Met, Not met or Not applicable, and the SPRS score updates as you go. Your marks stay in this browser only; nothing is sent anywhere. For evidence, owners and POA&M dates, use the Excel checklist.

110SPRS score
0 of 110Requirements marked
Conditional Level 2 status (with a POA&M)
Start with 3.12.4, the system security plan: without it there is no score.

Point values from 32 CFR 170.24; POA&M rules from 32 CFR 170.21. This calculator helps you prepare. It isn't an assessment: only your self-assessment and affirmation in SPRS, or an authorized assessor's result, counts.

How to use the CMMC checklist

Start with the level your solicitation or contract names. The Level 1 checklist and the Level 2 checklist are separate sheets. If you handle CUI, use the Level 2 sheet: it already includes the Level 1 requirements.

  1. Confirm the level and the scope. DoD sets the level based on the information involved: Level 1 for Federal Contract Information, Level 2 for CUI. The solicitation or contract states which one applies. Then list the systems, people and facilities that process, store or transmit that information. 32 CFR 170.19 and the DoD CIO scoping guides set out what’s in scope at each level.
  2. Get the system security plan in place first. For Level 2, requirement 3.12.4, the system security plan (SSP), has no point value, but without an up-to-date SSP an assessment can’t be completed at all. Write or update it before you score anything else, and make sure it describes how each requirement is met.
  3. Mark each requirement and record the evidence. Mark a requirement met only when every assessment objective for it in NIST SP 800-171A is satisfied and the evidence is final, not a draft. Mark it not applicable only when it doesn’t apply in your scope, for example 3.13.5 if you have no publicly accessible systems. Record the evidence and an owner on every row.
  4. Plan the fixes and check POA&M eligibility. For each requirement not met, write the fix, an owner and a target date in the POA&M columns. Only 1-point requirements can go on a CMMC POA&M, plus 3.13.11 when encryption is used but isn’t FIPS-validated, and six named requirements can’t go on one at all. Fix the 5-point and 3-point gaps first: they cost the most, and apart from that 3.13.11 case, a POA&M can’t cover them.
  5. Enter the result in SPRS and affirm it. Enter your self-assessment result in SPRS. A senior company official, the affirming official, then affirms compliance in SPRS after each assessment and every year. Repeat the Level 1 self-assessment every year and the Level 2 assessment every three years, and update the workbook whenever your systems change.

How the SPRS score works

The SPRS score sums up how much of NIST SP 800-171 you’ve implemented, weighted by how much each requirement matters. The same 110-point scale is used for the DoD’s NIST SP 800-171 assessments under DFARS 252.204-7019 and 252.204-7020 and for CMMC Level 2 under 32 CFR 170.24. It works like this:

  • Start at 110, one point for each requirement. If every requirement is met, that’s your score.
  • For each requirement not met, subtract its value. It’s 5 points if failing it could lead to significant exploitation of the network or exfiltration of CUI, 3 if the effect is specific and confined, and 1 for the rest. Under 32 CFR 170.24, 42 requirements are worth 5 points, 14 are worth 3 and 51 are worth 1.
  • Two requirements get partial credit. Multifactor authentication (3.5.3) costs 3 points if it’s in place only for remote and privileged users, and 5 if it isn’t in place for any users. FIPS-validated encryption (3.13.11) costs 3 points if encryption is used but isn’t FIPS-validated, and 5 if it isn’t used.
  • Every other requirement is all or nothing. A requirement that’s partly done is not met, and putting it on a POA&M doesn’t earn its points back.
  • The system security plan (3.12.4) has no point value. Without one there’s no score, because the assessment can’t be completed.
  • A requirement that doesn’t apply, such as wireless access controls when wireless access isn’t allowed, is scored the same as met.
  • The score can go negative. Add up every deduction and the lowest possible score is -203.
  • Example: if everything is met except 3.4.9 (user-installed software, 1 point) and multifactor authentication for general users (3 points), the score is 106. That’s above 88, but the MFA gap still can’t go on a POA&M, because its value is more than 1.

Level 1 vs Level 2 at a glance

CMMC has three levels. This checklist covers Level 1 and Level 2. Level 3 adds selected requirements from NIST SP 800-172, is assessed by the government, and isn’t covered here.

Status as of November 2026: Phase 1 of the rollout began on November 10, 2025, when the DFARS CMMC rule took effect. Phase 2 would have added third-party (C3PAO) certification as a condition of award from November 10, 2026, but the Department of War suspended it on July 13, 2026, and the DoD CIO’s CMMC page says the program is paused in Phase 1. During the suspension, solicitations may only require Level 1 (Self) or Level 2 (Self), and DFARS 252.204-7012 still applies. Check that page before you rely on any date.

How the two levels compare:

  • What it protects. Level 1: Federal Contract Information (FCI). Level 2: Controlled Unclassified Information (CUI).
  • Requirements. Level 1: the 15 in FAR 52.204-21, which match 17 NIST SP 800-171 requirements. Level 2: all 110 in NIST SP 800-171 Rev. 2, including those 17.
  • Who assesses. Level 1: you do, as a self-assessment. Level 2: you do for Level 2 (Self), or an authorized third-party assessment organization (C3PAO) does for Level 2 (C3PAO), depending on what the solicitation requires.
  • How often. Level 1: every year. Level 2: every three years.
  • Scoring. Level 1: pass or fail, and every requirement must be met. Level 2: a score out of 110, and a final status needs every requirement met.
  • POA&Ms. Level 1: not allowed. Level 2: allowed under 32 CFR 170.21 only with a score of at least 88 of 110, only for 1-point requirements (and 3.13.11 when encryption isn’t FIPS-validated), never for 3.1.20, 3.1.22, 3.10.3, 3.10.4, 3.10.5 or 3.12.4, and closed out within 180 days.
  • Reporting and affirmation. Self-assessment results go into SPRS. C3PAO results go into the DoD’s CMMC eMASS system, which sends them to SPRS. At both levels a senior company official affirms compliance in SPRS after each assessment and every year.

Frequently asked questions

How is the SPRS score calculated?

You start at 110, one point for each NIST SP 800-171 requirement, and subtract 5, 3 or 1 points for each requirement not met, depending on its value in the DoD scoring methodology. Multifactor authentication and FIPS-validated encryption cost 3 points instead of 5 if they’re partly in place. The score can go as low as -203, and without a system security plan there’s no score at all.

Can you self-assess for CMMC Level 2?

Yes, when the solicitation requires Level 2 (Self): you assess all 110 requirements, enter the score in SPRS and affirm it, with a new assessment every three years and an affirmation every year. The rule also lets DoD require a third-party C3PAO assessment for Level 2 instead. Since July 13, 2026, with Phase 2 suspended, DoD solicitations may only require Level 1 (Self) or Level 2 (Self), so check the current status before you plan around a date.

What is a POA&M in CMMC, and when is it allowed?

A plan of action and milestones (POA&M) lists the requirements you haven’t met yet, with the fix, the owner and the dates. At Level 2 it lets you reach a conditional status if you score at least 88 of 110 and only 1-point requirements are open, plus 3.13.11 when encryption is used but isn’t FIPS-validated, and none of six named requirements is on it. You must close it out within 180 days or the conditional status expires, and Level 1 doesn’t allow POA&Ms at all.

What does CMMC Level 1 cover?

Level 1 protects Federal Contract Information with the 15 basic safeguarding requirements in FAR 52.204-21: limiting system access, controlling external connections and public posting, identifying and authenticating users, sanitizing media, physical access controls, boundary protection, separating public systems, fixing flaws and protecting against malicious code. They match 17 NIST SP 800-171 requirements. You self-assess every year, every requirement must be met, and POA&Ms aren’t allowed.

How often do you have to do a CMMC self-assessment?

Every year for Level 1 and every three years for Level 2 (Self), with the results entered in SPRS. A senior company official also affirms compliance in SPRS after each assessment and every year, and a Level 2 status lapses if the annual affirmation isn’t made. Update the checklist whenever your systems change, so the next assessment starts from an accurate picture.

Related templates

Download Template

More procurement documents templates